Summit Environmental Technologies prides itself in its expansive testing capabilities in a variety of different fields. To find out if Summit conducts this test, contact us at 330-253-8211 today.
View Actual EPA Method 236.1 (PDF File)
EPA Method 236.1:Iron by Flame AA. Official Name: Iron (Atomic Absorption, Direct Aspiration)
Summary:A sample prepared according to EPA Method 200.0 is analyzed using a flame atomic absorption spectrometer. Specifications for instrument operation and preparation of standards are provided in the method.
Scope:This method determines iron by flame atomic absorption spectrometry. Sample pretreatment according to EPA Method 200.0 determines the applicability.
Citation:Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)
Interferences:For interferences see EPA Method 200.0.
QC Requirements:QC requirements for drinking water procedures are provided in method 200.0
Maximum Holding Time:6 months (MCAWW, Table 1).
Media:WATER
Subcategory:Inorganic
Concentration:0.3-5.0 mg/L (optimal range); 0.12 mg/L (sensitivity).
Sample Prep:200
Precision:Precision and accuracy values were calculated using interlaboratory data from EPA-managed Water Pollution (WP) performance evaluation studies.
Detection:The DL is to be considered the minimum working limit achievable with this method.
Revision Number:Issued 1971; Editorial Revision 1974 and 1978