EPA Method 283.1

Summit Environmental Technologies prides itself in its expansive testing capabilities in a variety of different fields. To find out if Summit conducts this test, contact us at 330-253-8211 today.

PDF IconView Actual EPA Method 283.1 (PDF File)


EPA Method 283.1:
Titanium by Flame AA. Official Name: Titanium (Atomic Absorption, Direct Aspiration)

Summary:
A sample prepared according to EPA Method 200.0 is analyzed using a flame atomic absorption spectrometer. Specifications for instrument operation and preparation of standards are provided in the method.

Scope:
This method determines titanium by flame atomic absorption spectrometry. Sample pretreatment according to EPA Method 200.0 determines the applicability.

Citation:
Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)

Interferences:
For interferences see EPA Method 200.0. A number of elements increase the sensitivity of titanium. To control this problem, potassium must be added to standards and samples alike.

QC Requirements:
QC requirements for drinking water procedures are provided in method 200.0

Maximum Holding Time:
6 months (MCAWW, Table 1).

Media:
WATER

Subcategory:
Inorganic

Concentration:
5 - 100 mg/L (optimal range); 2.0 mg/L (sensitivity).

Precision:
Precision and accuracy values were calculated using interlaboratory data from EPA-managed Water Pollution (WP) performance evaluation studies.

Detection:
The DL is to be considered the minimum working limit achievable with this method.

Revision Number:
Issued 1974